Knowledge Base

Rotating and Mobile Proxy Automatic IP Reset Settings: Second-Based Configuration Guide

The automatic IP renewal (reset) feature in LivaProxy Rotating Proxy and Mobile Proxy services allows users to automatically change their IP addresses at specific time intervals. In this guide, we will explain in detail how to set the automatic IP reset time and in which unit (seconds/minutes) it operates.

In Which Unit Does Automatic IP Reset Time Work?

The automatic IP reset setting in the customer panel works in seconds. You need to enter a value entirely in seconds, not in minutes or hours.

Example:

• To change IP every 2 minutes: 120 seconds
• To change IP every 5 minutes: 300 seconds
• To change IP every 10 minutes: 600 seconds
• To change IP every 1 hour: 3600 seconds

Minimum and Maximum Time Limits

There are certain limits set by the system for the automatic IP reset feature:

Minimum Time

The time you set for automatic IP renewal must be at least 120 seconds (2 minutes). You cannot enter a value below this. This limit is set to maintain system stability and ensure balanced operation of the proxy infrastructure.

Maximum Time

Theoretically, you can set very high durations, but since the purpose of the automatic reset feature is to provide regular IP rotation, it is recommended to set a reasonable time suitable for your use case.

Which Products Support Automatic IP Reset?

The automatic IP reset feature is available in the following LivaProxy products:

• Mobile Proxy: Works with mobile device IP addresses provided by Turkcell and Türk Telekom operators. The IP address automatically changes after your set time.
• Rotating IPv6 Proxy: Provides automatic IP rotation from the IPv6 pool.

Note: Our Datacenter IPv4, ISP IPv4, and standard IPv6 Proxy products have a fixed (static) IP structure and therefore do not offer automatic reset features.

How to Set Up Automatic IP Reset?

You can activate the automatic IP reset feature in your customer panel by following these steps:

1. Panel Login: Log in to your LivaProxy customer panel
2. Service Selection: Select the Mobile Proxy or Rotating IPv6 Proxy service you want to set automatic reset for
3. Settings Section: Find the "Automatic IP Reset" or "Auto Rotation" section on the service detail page
4. Time Entry: Enter your desired time in seconds (minimum 120)
5. Save: Save the settings and wait for the feature to activate

Second-Based Time Calculation Table

Second equivalents of commonly used durations:

Difference from Manual IP Reset

In addition to the automatic IP reset feature, manual IP change options are also available:

Manual Reset Methods

• Customer Panel: You can instantly change your IP by clicking the "IP Reset" button on the panel
• Reset API: You can change IP programmatically with API integration
• Reset Link: You can renew IP via browser or software using a special reset URL

Automatic Reset Advantages

• Requires no human intervention
• Regular IP rotation is guaranteed
• Eliminates the hassle of setting up timers
• Provides 24/7 uninterrupted automation

Recommended Durations by Use Case

Web Scraping and Data Collection

Recommended duration: 300-600 seconds (5-10 minutes)

For web scraping operations, adjustments should be made according to the target site's rate limit policies. Too frequent IP changes may be unnecessary, while very long durations may increase the risk of being blocked.

Social Media Automation

Recommended duration: 600-1800 seconds (10-30 minutes)

Since social media platforms perform behavioral analysis, longer IP change intervals may be preferred for a natural user appearance.

E-commerce and Price Comparison

Recommended duration: 1800-3600 seconds (30-60 minutes)

On e-commerce sites, browsing with the same IP for a certain period appears more natural.

SEO and Ranking Tracking

Recommended duration: 300-900 seconds (5-15 minutes)

Regular IP rotation when querying search engines prevents rate limit violations.

Frequently Asked Questions About Automatic Reset

Can I perform a manual reset while automatic reset is active?

Yes, you can manually change your IP at any time while the automatic reset feature is active. Manual reset resets the automatic timer and starts a new count.

Can I enter a duration shorter than 120 seconds?

No, the system has imposed a minimum limit of 120 seconds. If a value below this is entered, the setting will not be accepted.

Can I disable the automatic reset feature?

Yes, you can disable the automatic reset feature at any time. In this case, the IP address will only change with your manual reset operations.

Do duration changes take effect immediately?

Yes, changes you make to the automatic reset duration become active as soon as they are saved, and a new time count begins.

Technical Details and Considerations

• Time Precision: The second value you enter is applied exactly, but there may be a tolerance of ±2-3 seconds depending on network conditions
• Reset Duration: The IP change process is completed in 0-3 seconds for Mobile Proxy
• Active Connections: Your active connections may be interrupted during automatic reset, configure your software accordingly
• Quota Consumption: IP reset operations do not consume quota in Mobile Proxy services, only data traffic consumes quota

Conclusion

The LivaProxy automatic IP reset feature offers flexible configuration that works on a second basis with a minimum limit of 120 seconds. By setting the right duration for your use case, you can get maximum efficiency from your proxy service and run your automations without interruption. This feature, available in our Mobile Proxy and Rotating IPv6 Proxy services, provides regular IP rotation without requiring manual intervention.

If you want to receive technical support regarding your automatic IP reset settings or request consulting services for your specific use cases, you can contact our 24/7 support team.