Knowledge Base

Reboot and IP Rotate Operations in Rotating Proxy: URL Triggering Guide

IP address management in Rotating Proxy services can be performed through different methods according to user needs. In this article, we will examine in detail how reboot and IP rotate operations can be triggered via URL in Rotating Proxy services and the usage scenarios of these operations.

Difference Between Reboot and IP Rotate Operations

There are two different types of operations in Rotating Proxy services, and their purposes differ from each other:

Reboot Operation

The reboot operation refers to completely restarting the proxy connection server. This operation is a maintenance procedure that should only be used when technical issues are experienced. Continuously performing reboot operations can negatively affect system stability and lead to service interruptions.

Reboot operation should be used in the following situations:

• When the proxy connection is completely lost and cannot be re-established
• When the system is unresponsive or experiencing freezing
• When recommended by the support team
• When experiencing persistent connection issues

Important: URL triggering feature for reboot operation is restricted due to security and system stability reasons. This operation should only be performed manually through the customer panel when there is a genuine technical issue.

IP Rotate Operation

The IP Rotate operation allows you to change your current IP address and obtain a new IP address from the pool. This is the fundamental feature of Rotating Proxy and is expected to be used continuously in normal usage scenarios.

IP Rotate operation is used in the following situations:

• When you want to use a different IP address for each request
• To bypass rate limit restrictions of the target platform
• To provide diversity in web scraping and data collection operations
• To obtain a new IP when a specific IP address is banned
• When IP diversity is required in automation scenarios

Triggering IP Rotate Operation via URL

There is a URL-based triggering mechanism for IP rotate operations in Rotating Proxy services. With this feature, you can perform automatic IP rotation through your software and scripts.

Using the IP Rotate API

A special API endpoint is used to trigger the IP rotate operation. You can send an HTTP GET or POST request to this endpoint to achieve instant IP change.

Basic usage example:

GET https://api.livaproxy.com/rotate?key=YOUR_API_KEY

When you send an API request, the system assigns a new IP address for your current session and your connection automatically continues through the new IP.

IP Rotate with Sticky Session Usage

If you are using the sticky session feature in Rotating Proxy, the IP rotate operation is performed on a per-session basis. You can perform independent IP rotate operations for each session key:

username-session-123:password

In this usage, when IP rotate is triggered for "session-123", only the IP address for that session changes, other sessions are not affected.

Automatic IP Rotate Settings

In addition to manual URL triggering, Rotating Proxy services also offer automatic IP rotate feature. You can configure automatic IP rotation at specific time intervals through your customer panel:

• Every request: Default behavior, new IP for each connection request
• Time-based: Automatic rotation at specific second/minute intervals
• Request count-based: IP rotation after a specific number of requests

Response Codes and Error Management

It is important to monitor the response codes returned when using the IP rotate API:

IP Rotate Frequency and Limits

You need to pay attention to some limitations when triggering IP rotate operation via URL:

• Minimum waiting time: A minimum waiting time of 1-2 seconds between two rotate operations is recommended
• Rate limiting: Excessively frequent rotate operations may be detected as spam and temporarily restricted
• Thread capacity: The number of simultaneous rotations you can perform is limited according to your package

Software Integration Examples

IP Rotate with Python

import requests

# IP rotate operation
rotate_url = "https://api.livaproxy.com/rotate?key=YOUR_API_KEY"
response = requests.get(rotate_url)

if response.status_code == 200:
    print("IP successfully changed")
    # Continue with operations using new IP
else:
    print(f"Error: {response.status_code}")

IP Rotate with cURL

curl -X GET "https://api.livaproxy.com/rotate?key=YOUR_API_KEY"

Best Usage Practices

Pay attention to the following recommendations to use the IP rotate operation efficiently:

• Rotate when necessary: Change IP at logical points, not before every operation
• Implement error checking: Check API responses and establish retry mechanisms for errors
• Maintain logging: Log IP rotate operations to facilitate troubleshooting
• Comply with rate limits: Adjust rotation frequency to not exceed system limits
• Session management: If using multiple sessions, plan independent rotation for each session

When Should You Request a Reboot Operation?

If you encounter the following situations, you can initiate a reboot operation through the customer panel or contact our support team:

• If the IP rotate operation is not working at all
• If the proxy connection is constantly timing out
• If all IPs are not responding
• If the system appears completely frozen

Note: Reboot is not required for normal IP rotate operations. IP rotate automatically assigns a new IP and does not require system restart.

Conclusion

Reboot and IP rotate operations in Rotating Proxy services serve different purposes. The IP rotate operation can be triggered via URL and is a feature expected to be used continuously in normal usage. The reboot operation, on the other hand, is a maintenance procedure that should only be used when technical issues are experienced and does not support URL triggering for security reasons.

By using the IP rotate API correctly, you can develop your automation scenarios, increase IP diversity in your web scraping projects, and effectively manage rate limit restrictions of platforms.